Cara Glass Insert Pellet Stove

We are delighted to announce the launch of a new innovation in renewable heating - The Cara Glass Insert stove is the only insert pellet stove that fits into a standard fireplace

Cozy up with the Compact Pellet Stove! Designed to fit standard fireplaces,* our new Cara Glass Insert pellet stove boasts an A+ energy rating and 94.5% efficiency. Eco-designed for effortless cleaning with no mess and no fuss, it lights at the touch of a button, bringing instant warmth to your home. Embrace comfort and efficiency all season long!

Key Features

Maximum Heat Output 5.1 kW/ Reduced heat Output 3.0 kW
Fits into a either a 16” or 18” standard fireplace¹
Required depth of 420mm/ 16.5” /width to the rear of the void of 445mm /17.5”.
Efficiency , Nominal 91.1%, Reduced 94.5%
6.6Kg internal hopper runs for up to 10 hours in full capacity from a fill of pellets
Pellet consumption min 0.66 kg/h max 1.17 kg/h
Power setting adjustment 1-5
7 day programmable controller.
Remote Control
Flue outlet size 80mm
Fully compatible for installation with 80mm flexible flue liner.
Wifi Unit fitted as Standard ²
Commissioning Included
Retractable design for service/900 hour service interval.
Approved to EN 14785:2006 standard
Ecodesign 2022 approved
A+ Energy Label Rating

¹Standard Fireplace is based on an opening of either 16” or 18” wide by 22.5” high, Width of void and depth based on standard concrete block at 17.5”

Cara Glass Insert Pellet Stove

Cara Glass Insert Pellet Manual

Cara Glass Insert Pellet Datasheet

Declaration of Performance

Energy Label

Pellet Warranty

Authorised Installers

Share this Product

Information on Pellets

Pellet fuels (or pellets) are biofuels made from compressed organic matter or biomass and are suitable for use with wood pellets certified to EN 14961-2 grade A1 with a diameter of 6 mm and a length that can range from 10 to 30 mm.

As fuel, pellets are completely environmentally friendly, as they are made entirely of natural wood, without glue or other chemical compounds. Pellets have a high calorific value (4.7 to 5.3 kW/kg) which means they produce high heat output comparable to dry wood or coal. Pellets also have a low moisture content which helps consistent combustion efficient.

Ecodesign Stoves

Ecodesign is the European-wide programme to lower emissions to improve air quality from a range of appliances that use energy including stoves. Ecodesign labelling came into force 1st January 2022 and applies to both wood burning and solid fuel stoves.

The Ecodesign Directive Covers: Minimum efficiency rating of 75% for stoves, Reduction of CO (Carbon monoxide) –88%, New limit for emissions of NOx, Introduction in requirements for Particulate matter and organic gaseous compounds

All our Stanley and Bilberry Solid Fuel, Wood, Pellet and Gas stoves and inserts are Ecodesign certified.

Spare Parts

At Waterford Stanley we stock spare parts on all our stoves and cookers we sell today and hold spares parts on stoves and cookers discontinued up to 10 years.

Your local Stanley Centre or Stanley stockist will be pleased to supply spare parts and to provide any other information your require. For further information on your stove or cooker and exploded views, go to the Technical Manuals section or to find your nearest Stockist.

Technical Specifications

Fuel	Pellet
Function	Room Heating
Depth	100mm
Width	495.5mm
Height	590mm
Weight	52kg
Flue Outlet Diameter	80mm
Flue Requirement	Top

Heating Resource Centre

At Waterford Stanley, we don't just sell you one of our amazing stoves then send you on your way, we've got a countrywide network of approved installers and service engineers to make sure everything is running as it should – as well as a wide range of parts on all our stoves, just in case there's a problem!

You can find your local installer or service engineer's contact details, further information or exploded views on your product and FAQs in our Resource Centre

Visit the Heating Resource Centre