SOLIS K500 Pellet Stove

Renewable never looked so good. The Stanley SOLIS K500 Pellet stove is as visually stunning as is it efficient - Up to 96%. The SOLIS K500 comes in 3 finishes: white, black and claret with glass door and heat output between 3kw and 9kW.

Key Features

Maximum Heat Output 9kW to the room
High Efficiency up to 96% - almost 4 times more efficient than an open fire
Self-cleaning burner means reduced waste in your ash pan
17.5Kg internal hopper runs for up to 25 hours from a fill of pellets
Pellet consumption min 0.7 kg/h max 2 kg/h
Fully adjustable in terms of time and temperature including sleep timer
Programmable controller with up to 6 on/off times per day
Flue outlet size 80mm
Rear flue outlet only
Approved to EN 14785 standard
External air compatible
Available in 3 colours - Claret, Black and White
Includes commissioning
Ecodesign 2022 ready

Optional Extra

Pellet WIFI Kit

SOLIS K500 Pellet Documentation

SOLIS K500 Pellet Manual

SOLIS K500 Pellet Datasheet

Authorised Installers

Energy Label

Pellet Warranty

Stanley Pellet Stove WIFI kit

Share this Product

Information on Pellets

Pellet fuels (or pellets) are biofuels made from compressed organic matter or biomass and are suitable for use with wood pellets certified to EN 14961-2 grade A1 with a diameter of 6 mm and a length that can range from 10 to 30 mm.

As fuel, pellets are completely environmentally friendly, as they are made entirely of natural wood, without glue or other chemical compounds. Pellets have a high calorific value (4.7 to 5.3 kW/kg) which means they produce high heat output comparable to dry wood or coal. Pellets also have a low moisture content which helps consistent combustion efficient.

Ecodesign Stoves

Ecodesign is the European-wide programme to lower emissions to improve air quality from a range of appliances that use energy including stoves. Ecodesign labelling came into force 1st January 2022 and applies to both wood burning and solid fuel stoves.

The Ecodesign Directive Covers: Minimum efficiency rating of 75% for stoves, Reduction of CO (Carbon monoxide) –88%, New limit for emissions of NOx, Introduction in requirements for Particulate matter and organic gaseous compounds.

All our Stanley and Bilberry Solid Fuel, Wood, Pellet and Gas stoves and inserts are Ecodesign certified

Spare Parts

At Waterford Stanley we stock spare parts on all our stoves and cookers we sell today and hold spares parts on stoves and cookers discontinued up to 10 years.

Your local Stanley Centre or Stanley stockist will be pleased to supply spare parts and to provide any other information your require. For further information on your stove or cooker and exploded views, go to the Technical Manuals section or to find your nearest Stockist.

Where to Buy

Technical Specifications

Fuel	Pellet
Function	Room Heating
Depth	561mm
Width	500mm
Height	1072mm
Weight	92kg
Flue Outlet Diameter	Rear
Flue Requirement	80mm

Heating Resource Centre

At Waterford Stanley, we don't just sell you one of our amazing stoves then send you on your way, we've got a countrywide network of approved installers and service engineers to make sure everything is running as it should – as well as a wide range of parts on all our stoves, just in case there's a problem!

You can find your local installer or service engineer's contact details, further information or exploded views on your product and FAQs in our Resource Centre

Visit the Heating Resource Centre